7
Safety instructions
Device symbols
CE conformity marking according to
Medical Devices Directive 93/42/EWG
Proper disposal
Manufacturer
Please refer to the user manual
Protection class
Device is of protection class II
Application part type
Application part is type BF
Serial number
Refer to instruction manual / booklet
•
Consult with your doctor before using BEMER devices, if you are in the care
of a doctor.
•
Before you connect the BEMER device to the power supply, please make sure
that the power supply is identical with that of the B.BOX power pack supply.
•
Power cable and power plug must be in their original, undamaged condition.
Immediately replace any damaged parts!
•
Make sure to unplug the power plug when cleaning!
•
Do not misuse BEMER devices! The devices may not be used for any purposes
other than those mentioned here.
BEMER products are manufactured according to the latest tech-
nology and are completely safe to operate. Nevertheless, hazards
could be caused by this device. This is particularly the case when
insufficiently trained personnel are operating the device, or should
the device be inappropriately used and not according to its indica-
tions for use. Make sure that you have completely read and under-
stood the instruction manual. If you have any questions, do not
hesitate to contact us.
Direct contact between the device and its application modules
is only permissible on undamaged skin.
1960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 71960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 7 04.11.2020 08:47:2604.11.2020 08:47:26
To Next Page
Loading...
