14
These operating instructions contain important
information. Keep them close to your device in
order to inform yourself about safety instructions
as well as proper handling.
Please read the operating instructions very care-
fully before using the device. In this way you can
be assured that you benefit from all the advantages
that this system has to offer and protect yourself
and others from harm.
BEMER devices are designated only for the described,
intended use according to the operating instructions.
The BEMER temporarily increases local blood
circulation in healthy leg muscles and stimulates
healthy muscles in order to improve and facilitate
muscle performance.
The BEMER devices may be used for the following:
• To reduce stress
• To support sleep management
Treatment principles
1. Local treatment
The application modules B.SPOT and B.PAD are intended
for the local treatment of individual body parts, working with
a maximum flux density of 150 T. The targeted application
should follow the application of the basic plan and should be
applied to the shoulders, waist, back and lower extremities.
B.SPOT is an intensively active application module for use in
local treatment. B.SPOT is attached to the universal B.GRIP hold-
er and held on the body area that is to be treated. Alternatively,
the holder and application module can also be attached to the
part of the body that is in need of treatment with the provided
attachment strap.
B.PAD is an intensively active application module for local treat-
ment on individual body parts. The B.PAD is especially attractive
because of its flexibility and can be attached with the help of a
Velcro fastener strap to nearly every conceivable part of the body.
When using on disabled or mobility impaired people, the B.PAD
can provide a particularly valuable service.
User Information
1960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 141960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 14 04.11.2020 08:47:2704.11.2020 08:47:27
To Next Page
Loading...
