Programs on the Control Unit
The predefined program settings were specially developed for
the use of local applicators (B.SPOT, B.PAD) so that an addi-
tional therapy impulse can be given locally.
Local application is not a sufficient replacement for the
Basic Plan.
Use the local application two or three times per day, beginning
with P1 and change after two or three days to P2. The aim is not
to get to P2, if you feel uncomfortable with P2, return to P1.
P1
recommended
for home use 8 min.
Low intensity for
superficial /
minor stimulation
P2
recommended for
health care facilities 16 min.
Middle intensity for
somewhat deeper /
moderate stimulation
P1-P2 for daily users
P3 20 min.
Strong intensity for
muscle stimulation
and training
P3 for active athletes
For local application using the pre-defined programs, the
“HIGH” setting is recommended for use (see “Default settings”
for B.BOX Pro described on page 28).
BEMER Usage Support
If you still have questions or are uncertain, please
contact your treating medical doctor or contact
BEMER medical support:
Email: usage-support@bemer.services
1960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 181960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 18 04.11.2020 08:47:2704.11.2020 08:47:27
To Next Page
Loading...
