Bemer BEMER-SET PRO - Page 25

25
Applicators (display the remaining
time of the ongoing application)
1
Power Save (default activated)
2
Memory card (if inserted)
3
Volume (in current setting)
4
Rechargeable battery (state of charge)
5
Power supply operation (if connected)
6
Displays the active mode (the intensity
and status of the plus signal)
7
Application window (displays the application
progress incl. level and period of time)
8
Applicator window (displays the connected
application module on the chosen port)
9
User and navigation lines (contain
important operating elements,
e. g. plus button or [START / STOP])
10
1960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 251960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 25 04.11.2020 08:47:2904.11.2020 08:47:29