Bemer BEMER-SET PRO - Page 42

42
Technical Specifications BEMER
PRIMARY MODE OF ACTION Non-invasive tissue stimulation via magnetic field induction
Waveform Pulsed asymmetric, constant amplitude during treatment
Shape Sinusoidal, monopolar
Pulse repetition rate All accessories: 10-30 Hz
Single pulse duration All accessories: 10 - 33 µs
Maximum Power density applied: All accessories: 35 - 150 µT
Maximum Output Current Current directly applied to the patient’s body
All accessories: < 5 mA (acc. to IEC 60601-1)
1960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 421960-2002-BEDIENANL-B.BOX-USA-FDA-2020-US-en-v13-Akku Rev20_4.indd 42 04.11.2020 08:47:3104.11.2020 08:47:31