124
B.SCAN
e B.SCAN is integrated in your B.BOX and is designed
to check your BEMER devices along with safety precau-
tions for their proper function. e B.SCAN makes the
multidimensional BEMER Signal configuration audible
and is therefore also ideally suitable as an effective dis-
play demonstration tool for interested persons.
e device is switched on by pressing the button once; pressing and holding down
the button (for several seconds) will switch off the device. If no Signal system is
detected, the B.SCAN automatically switches off after 10 seconds.
: : .
To Next Page
Loading...
