138
: : ‘
Electromagnetic emission
The BEMER SET CLASSIC / PRO is designed for operation in the electromagnetic environment listed below.
The customer or user of the BEMER SETS CLASSIC / PRO should ensure that the device be used in such an environment.
EMISSION TESTS COMPLIANCE ELECTROMAGNETIC ENVIRONMENT GUIDELINES
RF emisions according to CISPR 11 Group 1 The BEMER SET CLASSIC / PRO uses RF energy exclusively for its internal function.
Therefore, its RF emission is very small. It is unlikely that nearby electronic devices
will be disturbed.
RF emisions according to CISPR 11 Class B The BEMER SET CLASSIC / PRO is designed for use in all premises, including such
residential areas that are directly connected to a public power supply that also
supplies residential buildings.
Harmonics according to
IEC 61000-3-2
Not usable
Voltage fluctuations /
flicker according to IEC 61000-3-3
Not usable
Table according to EN 60601-1-2
Guideline and manufacturer‘s declaration of conformity (tables according to EN 60601-1-2)
To Next Page
Loading...
