16
TESTING (CONT.)
Matching Your Remote Control Code
Your remote control will be matched with a code
at the time of delivery. In the case that your remote
control malfunctions, match the codes as per the
following method.
1. Unplug your product. Press and hold the
stop key until the level indicators flicker.
2. Place the remote control close to the product
and plug your product back in.
3. The level indicator should stop flickering and all
lights should be on normally. All level indicators
should light up red (normal).
4. Codes are matched properly when
all lights are on.
To Next Page
Loading...
