21
MAINTENANCE
Maintenance Of Product Surface
and Ceramics
1. Wipe dust or stains with a soft wet cloth.
2. A wet soft brush, cloth, or sponge may be
used to clean the ceramic area. Do not use
abrasive cleaning solutions, such as alcohol,
bleach, paint thinner, cresol, benzene,
gasoline, etc.
Maintenance Of The Nozzle
1. Press the “Nozzle Clean” button on the
remote control without occupying the seat.
The nozzle will extend. Proceed to clean
with a soft toothbrush. Do not forcefully
hold the nozzle.
Regular Maintenance Is Required To Ensure Normal Use.
Note: Cut off the power and water supply before maintenance. Direct water
wash to the entire product is prohibited.
To Next Page
Loading...
