Bender EDS440-L - Screw Mounting; DIN Rail Mounting

MountingMounting
EDS44x_D00201_07_M_XXDE/06.2020
17
5.3 Screw mounting
1. Fix the two mounting clips provided with the device manually or using a tool as
illustrated below.
2. Drill the mounting holes for the M4 thread according to the dimensioned drilling
template.
3. Fix the EDS44x using two M4 screws.
36 mm
100 mm
107,3 mm
Ø M4
5.4 DIN rail mounting
1. Fix one of the provided mounting clips manually or using a tool as illustrated below.
2. Snap the EDS44x securely on the DIN rail.
3. Push the mounting clip until it clicks into place.
c
lic
k
!