Installation, connection and commissioning
25
VMD460-NA_D00001_05_M_XXEN/01.2020
4.5 Dimension diagram VMD460-NA
All dimensions in mm
Fig. 4.2: Dimension diagram and drawing for screw mounting
4.6 DIN rail mounting
Snap the rear mounting clip of the device into place in such a way that a safe and tight
fit is ensured.
4.7 Screw mounting
1. Use a tool to position the rear mounting clips so that they project beyond the
enclosure (a second mounting clip is required, see ordering details).
2. Then fix the device using two M4 screws.
To Next Page
Loading...
