Basic programs
50
VMD460-NA_D00001_05_M_XXEN/01.2020
Selecting a standard
MENU button --> 3. Settings --> 1. General --> 1. Standard
Loading a standard takes approximately five seconds and is indicated on the display by
means of a progress bar. By default, the first profile is loaded for all standards whose set-
tings can be made over several profiles.
Selecting a profile
MENU button --> 3. Settings --> 1. General --> 2. Profile
The settings for the different profiles are made according to the loading of a standard.
The following tables give an overview of the menu structure for each preset standard.
The values can be changed in the third level of the menu (column "twice ") using
.
Exit the respective menu item with
ESC (= without saving the changed parameter)
(= saving the changed parameter)
G59/2(:2010, -1:2011) G59/2
User-defined settings will not be saved if the standard is changed.
To Next Page
Loading...
