BendPak XPR-10 Series User Manual

XPR-10 Series Two-Post Lifts 76 P/N 5900951 — Rev. D — May 2019
Wiring Diagrams
This section includes wiring information for the Microswitch(es).
⚠ DANGER All wiring must be performed by a licensed, certified Electrician. Make sure that
main electrical power has been disconnected from the Lift and cannot be
re-energized until all procedures are complete. If your organization has Lockout/
Tagout policies, make sure to implement them after connecting the Lift to power.

BendPak XPR-10 Series Specifications

General

Brand	BendPak
Model	XPR-10 Series
Category	Lifting Systems
Language	English