Benelli TRK 502X User Manual

TRK 502/ 502X
30
For driving a new motorcycle in its rst 1,000km way, the engine should not be over revved and all the gears shall
not be over 80% of red zone engine rpm; don't operate the throttle under a fully open position; change the gears
in time to keep the engine rpm in reasonable range. It is strongly suggested to use the motorcycle very carefully
during its running in period; also the rider has to be familiar to the performance.
Note：In the rst 300km of break in, you should examine the cleanliness of the engine oil frequently. Check the
oil level of engine oil before driving.
INSPECTION BEFORE DRIVING
Please check on the following contents which are very important before driving,
RUNNING IN
Content
Handlebar
Braking
Comments
1) Stable
2) Turn smoothly
3) No sliding or loose
1）Right clearance of the lever and brake pedal
2）No sponge feeling

Benelli TRK 502X Specifications

General

Displacement	500 cc
Bore x Stroke	69 mm x 66.8 mm
Compression Ratio	11.5:1
Max Power	47.6 HP (35 kW) @ 8500 rpm
Transmission	6-speed
Final Drive	Chain
Frame	Steel Trellis
Ground Clearance	220 mm
Fuel Tank Capacity	20 liters
Weight (Dry)	213 kg
Engine Type	Liquid cooled, 4-stroke, 2-cylinder
Max Torque	46 Nm @ 6000 rpm
Fuel System	Electronic fuel injection
Front Suspension	50 mm upside-down fork, adjustable
Rear Suspension	Single shock, adjustable
Front Brake	320 mm double disc, ABS
Rear Brake	260 mm single disc, ABS
Front Tire	110/80 R19
Rear Tire	150/70 R17
Seat Height	840 mm