Benewake TF02-Pro

To Next Page

To Previous Page

BP-UM-30 A01

Figure 5-2 BW_TFDS software interface and display

Note

① Please turn off any anti-virus software before uncompressing the PC

software. Otherwise, the software maybe detected as virus and deleted

by anti-virus. The software is only runnable under Windows.

② If no data is available in area “④TIME LINE CHART”, please check the

wire connection and sequence. When TF02-Pro is successfully powered

on, there will be a red indicator light inside transmitting lens viewing

from the front.

③ The value of distance output Dist may vary with the output unit, which

is cm by default. If the unit of distance is changed to the unit-mm with

specific command, and the PC software will be unable to identify it, and

so the unit of “④TIME LINE CHART” will still be cm. For example, the

actual TF02-Pro measurement is 1m, the distance value of TF02-Pro is

1000 in mm, the value read by the PC software also is 1000, but the unit

will not change and still display cm.

Benewake TF02-Pro - Page 16