EasyManua.ls Logo

Bennett Read DYNAMITE - Replacement Parts

Bennett Read DYNAMITE
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
REPLACEMENT PARTS
The items below are available for purchase as accessories for your BENNETT READ DYNAMITE
vacuum. To purchase contact Tevo customer care in your area. Contact details on back cover.
Item Part name
TROUBLESHOOTING CONTINUED
Problem Possible causes Solution
Dust blows out
of the air vents
1. Dirt container is full 1. Empty the dirt
container
2. Filters missing or installed
incorrectly
2. Check all lters for
correct installation
3. Filters are dirty 3. Check and clean or
replace all lters
4. Hose connector is blocked 4. Remove hose and
check for blockages
5. Hose connector is not securely
attached to the suction inlet
5. Make sure the hose
connector is locked
into the suction inlet
6. Crack or hole in hose 6. Check hose and
replace if necessary
Other maintenance or service not included in the manual must be performed by an authorized Tevo service
representative. For any questions or concerns, contact customer care on 0861 77 88 88.
Part #
1. HVC29C01 Dirt container Microparticle lter
2. ZHVC12902 Post-motor lter
3. ZHVC12903 Floor nozzle
4. ZHVC12904 Hose with handle
5. ZHVC12905 Extension wands (2)
6. ZHVC12906 Crevice tool/Dusting brush Combo Tool
2. 3.
4. 5.
1.
6.

Related product manuals