Bennett Read DYNAMITE - Maintenance and Care

6
MAINTENANCE AND CARE
To reduce the risk of injury from moving parts
and/or electrical shock, turn Power Switch
OFF and disconnect plug from electrical outlet
before performing maintenance checks.
!
WARNING:
EMPTYING THE DIRT CONTAINER
Empty the dirt container as soon as
the dirt reaches the “max” line on the
sides of the dirt container (15).
STEP 1:
Unplug the vacuum from the electrical
outlet
STEP 2:
Remove the hose by pressing the securing
clips inward and pulling the hose
connector out from the suction inlet. Set the
hose aside
STEP 3:
Lift the dirt container release handle in
front of the carry handle to remove the dirt
container
STEP 4:
Open the dirt container lid by pressing the
button below the release handle and lifting
the lid upwards
STEP 5:
Remove the dirt container lid
STEP 6:
Shake out the dirt container over a rubbish
bin
STEP 7:
Replace the lid on the dirt container
STEP 8:
Replace the dirt container by placing it
back into the vacuum and pushing down
on the dirt container until it clicks back into
place
To maintain maximum performance from your vacuum, perform these maintenance checks:
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6