7
MAINTENANCE AND CARE
CLEANING THE DIRT
CONTAINER FILTER
(MICROPARTICLE FILTER)
The key to maximum performance
is a clean lter. Cleaning the lters
after each use will help your
DYNAMITE vacuum operate at peak
efciency.
STEP 1:
Remove and open the dirt container (follow
steps 1 to 3 on page 6)
STEP 2:
Remove the Microparticle Filter (14) from
the back of the Dirt Container by gently
pulling the tab
STEP 3:
The Microparticle Filter can be hand
washed in cold water with a mild
detergent.
Rinse the lter well and air dry
COMPLETELY before placing back
into the Dirt Container.
STEP 4:
Insert the Microparticle Filter back into the
Dirt Container by lining up the bottom tab
rst, then gently pushing the lter securely
into place from the top
Never operate your DYNAMITE vacuum without all
the lters in place. Doing so may damage the motor
and void the guarantee.
!
CAUTION:
Never operate your DYNAMITE
vacuum with damp or wet lters.
!
WARNING:
STEP 4
STEP 2
To Next Page
Loading...
