EasyManua.ls Logo

Bennett Read DYNAMITE - Special Tools

Bennett Read DYNAMITE
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5
To avoid injury, turn cleaner OFF and
unplug cord from wall when not in use.
!
WARNING:
Before cleaning under low furniture, check
area rst for objects that might harm the unit
or block the hose.
TIP:
Hair, string and small objects can block the
hose and tools. Check them occasionally for
obstructions.
TIP:
AIR FLOW REGULATOR
Open the air ow regulator (5) by sliding the
regulator down towards the extension wand
to an open position. This will reduce the
suction power for vacuuming delicate fabrics.
For full suction power, close the air ow
regulator by sliding the regulator up to the
closed position.
ELECTRONIC VARIABLE
SUCTION CONTROL DIAL
To reduce the suction power for vacuuming
delicate fabrics, turn the Electronic Variable
Suction Control Dial (12) anticlockwise. To
increase the suction power, turn the Electronic
Variable Suction Control Dial clockwise.
OPERATIONS
SPECIAL TOOLS
Your BENNETT READ DYNAMITE vacuum is
not only a powerful carpet and rug cleaner,
it’s also a versatile bare oor and above oor
vacuum cleaner when you select one of the
special tools.
FLOOR NOZZLE
Use to vacuum carpets, rugs and bare oors.
The swivel head turns to get into tight spaces
and ts under cabinets
1. To vacuum carpets and rugs, push the
brush switch to the carpet position
[ ]. This will pull the brushes up
into the oor nozzle.
2. To vacuum bare oors, push the brush
switch to the bare oor position [ ].
This will extend the brushes
down from the oor nozzle.
CREVICE TOOL/DUSTING BRUSH
To vacuum in narrow spaces, use the Crevice
Tool. To convert to the Dusting Brush, ip the
brush over for cleaning curtains, draperies,
cushions and fabrics.
Brush up Brush down
1. 2.
Air ow regulator
Dusting
brush
Crevice
tool

Related product manuals