English
Preparing Your Camera for Use 5
2.2 Inserting and removing an SD memory card
The camera is equipped with internal memory,
allowing you to record video clips and capture
images. You can also expand the memory capacity by
using an optional SD (Secure Digital) memory card
to store more files.
1. Always make sure the camera is turned off before
inserting or removing a memory card.
2. Insert an SD memory card in the correct
direction as shown in the illustration.
3. Close the battery / SD memory card cover.
To remove the SD memory card, make sure the camera is turned off. Press lightly on the
edge of the memory card and it will eject.
• Be sure to format the SD memory card with this camera before the initial use.
• To prevent valuable data from being accidentally erased from an SD memory card, you
can slide the write-protect tab (on the side of the SD memory card) to “LOCK”.
• To save, edit, or erase data on an SD memory card, you must unlock the card.
• SD memory card in the following sizes are supported: 64 MB, 128 MB, 256 MB, 512 MB,
1 GB, 2GB, 4GB, 6GB, 8GB and 16GB SDHC. The camera is compatible with SD memory
cards manufactured by Panasonic, Toshiba, and Sandisk. Please contact your local
dealer for purchase information.
Unlocked: You can use both capture
and playback modes.
Locked: You can use the playback mode
only.
DSC_C1020_UM CD EN.book Page 5 Monday, March 2, 2009 12:00 PM
To Next Page
Loading...
Need help?
General
