English
Using the Camera20
3.7.15 Using Smile Catch
Smile Catch automatically captures the moment of a smile of your subject.
1. In the capture mode, press and select .
2. The camera is tracking the face of your subject (a white frame shows).
3. Press the shutter to activate smile tracking, and then release the shutter immediately. The
camera now is tracking the smile of your subject (a green frame shows).
4. Once a smile is detected, the camera instantly takes a picture.
5. The camera continues to detect smiles and takes more pictures (Step 4 is repeated). To
stop the smile tracking at anytime, press the shutter.
• The camera will also automatically stop smile tracking if your subject leaves your
composition area.
• Face tracking (one face only) is always on in the Smile Catch mode.
3.7.16 Smart Scene
Smart Scene automatically selects the best shooting mode from Backlight , Landscape
, Macro , Portrait , and Night Scene .
1. In the capture mode, press and select .
2. Press the shutter halfway to set automatic focus. The selected shooting mode is displayed
in the top left corner of the screen.
3. Press the shutter to capture an image.
• If the current environment does not fit into one of the above 5 shooting modes, Smart
Scene will automatically switch to its default value.
3.7.17 Blink Detector
Blink Detector automatically detects blinking when you capture an image.
1. In the capture mode, press and select .
2. Press the shutter to capture an image. If blinking is detected, a warning message appears
on the screen.
3. Press [ ] / [ ] to save or discard the image, and then press [ ] or to confirm.
DSC_C1020_UM CD EN.book Page 20 Monday, March 2, 2009 12:00 PM
To Next Page
Loading...
Need help?
General
