BenQ HT4050 User Manual (English)

Other manuals for BenQ HT4050

Questions and Answers:

H
harmonedwardAug 8, 2025
How to fix a BenQ Digital projector that does not turn on?
- K
  Katie ParkerAug 8, 2025
  If your BenQ Digital projector isn't turning on, there could be a few reasons. First, ensure the power cord is correctly plugged into both the projector's AC inlet and a working power outlet, and that the outlet switch is on. Also, if the projector is cooling down, wait for the process to complete before attempting to turn it on again. Finally, check that the lamp cover is securely attached.
M
Michelle WalkerAug 13, 2025
What to do if my BenQ Digital projector has no picture?
- M
  Michael AndersonAug 13, 2025
  If your BenQ Digital projector shows no picture, start by ensuring that your video source is turned on and correctly connected. Verify the projector is correctly connected to the input signal device. Then, select the correct input signal using the SOURCE key on the projector or remote control.
K
Karen OrtizAug 18, 2025
Why is my BenQ Digital projector remote control not working?
- R
  Richard MarksAug 18, 2025
  If your BenQ Digital projector's remote control isn't working, the battery might be out of power, so try replacing it with a new one. Also, check for any obstacles between the remote and the projector and remove them. Finally, make sure you are within 7 meters (23 feet) of the projector.
A
Alicia ChaneyAug 25, 2025
How to fix a blurred picture on my BenQ Digital projector?
- J
  Joshua GarrettAug 25, 2025
  If the picture on your BenQ Digital projector is blurred, try these steps: First, adjust the focus of the lens using the focus ring. Next, adjust the projection angle, direction, and height of the unit to properly align the projector and the screen. Also, make sure to remove the lens cover.
A
Alex McintyreAug 29, 2025
What causes an unstable image on a BenQ Digital projector?
- R
  rowemeganAug 29, 2025
  An unstable image on your BenQ Digital projector may be caused by connection cables that are not securely connected to the projector or the signal source. Ensure that the cables are correctly connected to the appropriate terminals.
C
chad45Sep 3, 2025
What to do if 3D content does not display correctly on BenQ Digital projectors?
- C
  Caitlin WilkersonSep 3, 2025
  If 3D content isn't displaying correctly on your BenQ Digital projector, first recharge the 3D glasses. Then, ensure that the settings in the 3D menu are correctly configured. Verify that you are using a 3D Blu-ray Disc. Finally, select the correct source using the SOURCE key on the projector or remote control.

BenQ HT4050 Specifications

General

Display Technology	DLP
Native Resolution	1920 x 1080
Throw Ratio	1.39 - 2.09:1
Input Lag	33 ms
Lamp Life (Normal)	3500 hours
Lamp Life (Eco)	5000 hours
Lamp Life (SmartEco)	6000 hours
Speakers	10W
Projection Size	60" - 300"
Inputs	HDMI x 2
Brightness	2200 ANSI Lumens
Zoom Ratio	1.3:1

Summary

Important Safety Instructions

General Safety Precautions

Key safety guidelines covering manual reading, lens safety, servicing, and power considerations.

Projector Features

Key Technologies and Capabilities

Highlights features like Full HD, high picture quality, color reproduction, lens shift, and 3D support.

Controls and Functions

Projector Unit Controls

Remote Control Operations

Remote Control Button Functions

Details the function of each button on the remote control for projector operation.

Positioning Your Projector

Choosing an Installation Location

Shifting the Projection Lens

Connecting Devices to the Projector

HDMI Connection Guide

Connecting HDMI Sources

Details how to connect HDMI devices for high-definition video transmission.

Smart Device Connection

PC Connection Guide

Connecting PCs and Notebooks

Details connecting PCs or notebooks using VGA or USB cables.

Connecting Video Source Devices

Video Input Options and Quality

Playing Sound Through the Projector

Projector Operation

Starting Up the Projector

Step-by-step instructions for powering on the projector and initial setup checks.

Initial Setup Wizard

Initial Setup Wizard Steps

Configuring Setup Options

Adjusting the Projected Image

Adjusting Projection Angle

Auto-Adjusting Image Quality

Fine-Tuning Image Size and Clarity

Using Zoom and Focus Controls

Correcting Keystone Distortion

Keystone Correction Methods

Explains how to correct trapezoidal distortion using the remote control or projector buttons.

Menu Functions Overview

About OSD Menus

Introduces the Basic and Advanced OSD menus and how to access them.

Using the Basic OSD Menu

Basic Menu with Input Signals

Details primary menu functions like Picture Mode, Sound Mode, Volume, Mute.

Using the Advanced OSD Menu

Advanced OSD Menu Structure

Lists main menus (Picture, Audio, Display, System Setup, Information) and their submenus.

Password Management

Forgetting and Recalling the Password

Information on handling forgotten passwords and the password recall procedure.

Changing and Disabling Password

Modifying Password Settings

Steps to change an existing password or disable the password protection feature.

Switching Input Signals

Automatic and Manual Signal Selection

How to enable automatic signal search or manually cycle through input sources.

Picture Menu Settings

Picture Mode Selection

Explains preset modes like Bright, Vivid, Cinema, Game, 3D, and User modes for optimal viewing.

Picture Adjustment Controls

User Mode and Basic Adjustments

Advanced Picture Controls

Sharpness, Tone, and Lamp Power

Detailed Picture Enhancements

Black Level, Gamma, and Color Tuning

Advanced Color Management

Color Management Options

Image Enhancement Features

Audio Setup Menu

Sound Mode and Volume Settings

Display Menu Settings

Aspect Ratio and Image Positioning

3D Viewing Settings

3D Sync and Mode Configuration

System Setup: Basic Menu

Basic System Configuration Options

Covers language, splash screen, projector position, auto-off, and menu settings.

System Setup: Advanced Menu

Lamp and HDMI Advanced Settings

Advanced settings for lamp timer, HDMI format, CEC, baud rate, and test patterns.

Advanced System and Security Settings

High Altitude, Password, and Lock Features

Configures High Altitude Mode, password, key lock, LED indicators, and system reset.

Shutting Down the Projector

Proper Shutdown Procedure

Step-by-step instructions for safely turning off the projector and cooling down the lamp.

Advanced OSD Menu Structure

OSD Menu Hierarchy Overview

Visual breakdown of the Advanced OSD menu structure, showing main and submenus.

System Setup: Basic Menu Options

Language, Display, and Menu Settings

Configuration options for language, background color, splash screen, and menu behavior.

Projector Position and Power Management

System Setup: Advanced Menu Options

Lamp, HDMI, and System Controls

Advanced settings for lamp, HDMI, baud rate, test patterns, and closed captions.

Security, Reset, and ISF Calibration

Maintenance Procedures

Cleaning the Projector

Lamp Information and Management

Understanding Lamp Hour Usage

Extending Lamp Life and Auto Power Off

Timing of Lamp Replacement

Lamp Warning Indicators

Replacing the Projector Lamp

Lamp Replacement Safety and Steps

Safety precautions and step-by-step instructions for replacing the projector lamp.

Projector Indicators Explained

Understanding Indicator Lights

Troubleshooting Common Issues

Problem Resolution Guide

Covers common problems like no power, no picture, unstable image, and their remedies.

Projector Specifications

Technical Specifications Overview

Lists detailed technical specs including optical, electrical, mechanical, input/output terminals, and environmental requirements.

Timing Charts for HDMI and MHL Input

Related product manuals

BenQ CinePrime HT3550

BenQ Mainstream MP611

60 pages

BenQ HT4050 User Manual

Table of Contents

Other manuals for BenQ HT4050

Questions and Answers:

BenQ HT4050 Specifications

Summary

Important Safety Instructions

General Safety Precautions

Projector Features

Key Technologies and Capabilities

Controls and Functions

Projector Unit Controls

Remote Control Operations

Remote Control Button Functions

Positioning Your Projector

Choosing an Installation Location

Shifting the Projection Lens

Connecting Devices to the Projector

HDMI Connection Guide

Connecting HDMI Sources

Smart Device Connection

PC Connection Guide

Connecting PCs and Notebooks

Connecting Video Source Devices

Video Input Options and Quality

Playing Sound Through the Projector

Projector Operation

Starting Up the Projector

Initial Setup Wizard

Initial Setup Wizard Steps

Configuring Setup Options

Adjusting the Projected Image

Adjusting Projection Angle

Auto-Adjusting Image Quality

Fine-Tuning Image Size and Clarity

Using Zoom and Focus Controls

Correcting Keystone Distortion

Keystone Correction Methods

Menu Functions Overview

About OSD Menus

Using the Basic OSD Menu

Basic Menu with Input Signals

Using the Advanced OSD Menu

Advanced OSD Menu Structure

Password Management

Forgetting and Recalling the Password

Changing and Disabling Password

Modifying Password Settings

Switching Input Signals

Automatic and Manual Signal Selection

Picture Menu Settings

Picture Mode Selection

Picture Adjustment Controls

User Mode and Basic Adjustments

Advanced Picture Controls

Sharpness, Tone, and Lamp Power

Detailed Picture Enhancements

Black Level, Gamma, and Color Tuning

Advanced Color Management

Color Management Options

Image Enhancement Features

Audio Setup Menu

Sound Mode and Volume Settings

Display Menu Settings

Aspect Ratio and Image Positioning

3D Viewing Settings

3D Sync and Mode Configuration

System Setup: Basic Menu

Basic System Configuration Options

System Setup: Advanced Menu

Lamp and HDMI Advanced Settings

Advanced System and Security Settings

High Altitude, Password, and Lock Features

Shutting Down the Projector

Proper Shutdown Procedure

Advanced OSD Menu Structure

OSD Menu Hierarchy Overview

System Setup: Basic Menu Options

Language, Display, and Menu Settings

Projector Position and Power Management