Operation
50
Note that the menu items are available when the projector detects at least one valid
signal. If there is no equipment connected to the projector or no signal detected,
limited menu items are accessible.
5.
SYSTEM
SETUP:
Advanced
High Altitude
Mode
On/Off Yes/No
Audio Settings
Mute On/Off
Volume 0~10
Lamp Settings
Lamp Mode
Normal/Economic/SmartEco/
LampSave
Reset Lamp Timer Reset/Cancel
Equivalent Lamp Hour
Security
Settings
Change Password
Change Security Power on lock
Baud Rate
2400/4800/9600/14400/19200/
38400/57600/115200
Test Pattern On/Off
Closed
Caption
Closed Caption Enable On/Off
Caption Version CC1/CC2/CC3/CC4
Standby
Settings
Standby Monitor Out On/Off
Audio Pass Through
Off/Computer/Video, Svideo/
HDMI1/HDMI2
Reset All
Settings
Reset/Cancel
6.
INFORMA
TION
Native Resolution
Current System Status
Source
Picture Mode
Lamp Mode
Resolution
3D Format
Color System
Equivalent Lamp
Firmware Version
To Next Page
Loading...
