19
Initial setup
1. Turn on the display. Wait for the display to boot up with the BenQ screen.
2. Follow the on-screen instructions to set up the language, date and time, and network. You
can skip some of these steps and complete the setup later.
3. For copy data and set pin code section, select Skip to continue.
4. In BenQ service selection screen, set the toggle to On.
5. Select Next to continue. Your BenQ Board will restart.
Google has a default screen lock feature that locks the screen when the board is idle. To disable this
function, tap
All apps > Settings app. Go to Security > Screen lock and select None.
Enable AMS service
You may enable AMS service if account management is required. Select AMS service at the
bottom left corner to activate BenQ AMS service.
To Next Page
Loading...
Need help?
General
