BenQ TK700ST - Positioning Your Projector; Choosing a Location

11 Positioning your projector
Positioning your projector
Choosing a location
Before choosing an installation location for your projector, take the following factors into
consideration:
• Size and position of your screen
• Electrical outlet location
• Location and distance between the projector and the rest of your equipment
You can install your projector in the following ways.
After turning on the projector, go to Advanced menu - Installation > Projector Position, press
OK and press / to select a setting.
1. Front
Select this location with the projector placed
on the table in front of the screen. This is the
most common way to position the projector
for quick setup and portability.
2. Rear
Select this location with the projector placed
on the table behind the screen. Note that a
special rear projection screen is required.
3. Front Ceiling
Select this location with the projector
suspended upside-down from the ceiling in
front of the screen. Purchase the BenQ
Projector Ceiling Mount Kit from your dealer to
mount your projector on the ceiling.
4. Rear Ceiling
Select this location with the projector
suspended upside-down from the ceiling
behind the screen. Note that a special rear
projection screen and the BenQ Projector
Ceiling Mount Kit are required for this
installation location.