32 Menu operation
2. Main menu: Audio
Structure
Function descriptions
Menu Options
Sound Mode Cinema/Music/Game/Sports/User
User Sound EQ
100Hz/300Hz/1kH
z/3kHz/10kHz
-10 – +10
Mute Off/On
Volume 0 – 20
Power On/Off Ring
Tone
Off/On
Reset Audio Reset/Cancel
Menu Descriptions
Sound Mode
This function utilizes treVolo and Bongiovi DPS (Digital Power Station)
Technology, which incorporates its patented algorithms with 120
calibration points that optimizes any audio signal in real time to add depth,
clarity, definition, presence and enhanced stereo field imaging for more
immersive audio experience. The following preset sounds are available:
Cinema, Music, Game, Sports, and User. When Game Mode on the
Advanced menu - Picture > Game Settings is activated, FPS/SPG/RPG
respectively deploys Game/Sports/Cinema sound mode.
The User mode allows you to personalize the sound settings. When
selecting the User mode, you may make manual adjustments with the User
Sound EQ function.
If the Mute function is activated, adjusting Sound Mode will turn off the
Mute function.
User Sound EQ
Select desired frequency bands (100 Hz, 300 Hz,1k Hz, 3k Hz, and 10k Hz)
to adjust the levels according to your preference. The settings made here
define the User mode.
Mute
Select On to temporarily turn off the projector's internal speaker or the
volume being output from the audio output jack.
To restore the audio, select Off.
Volume
Adjusts the volume level of the projector's internal speaker or the volume
being output from the audio output jack.
If the Mute function is activated, adjusting Volume will turn off the Mute
function.
Power On/Off
Ring Tone
Sets the ring tone for the projector On or Off.
The Power On/Off Ring Tone can only be adjusted here. Setting the sound
mute or adjusting the sound level do not affect the Power On/Off Ring
Tone.
Reset Audio
Returns all of the adjustments you’ve done under the Audio menu to the
factory preset values.
To Next Page
Loading...
