BenQ TK700ST - Page 39

39 Menu operation
Menu Settings
• Menu Type
Sets the OSD menu type according to your needs.
• Menu Display Time
Sets the length of time the OSD will remain active after your last key press.
• Menu Position
Sets the On-Screen Display (OSD) menu position.
Light Source
Information
This menu page displays the following information:
• Light Source Usage Time
• Light hours used under Normal Mode, ECO Mode, SmartEco Mode,
LampSave.
• And the Equivalent Light Hours.
For details about how to calculate the hours, see Getting to know the light
hour on page 43.
When a new lamp is installed, and you need to reset the timer, highlight
Reset Light Timer and select Reset.
Operation
Settings
• Reminder Message
Sets the reminder messages on or off.
• LED Indicator
You can turn off the LED warning lights. This is to avoid any light
disturbance when viewing images in a dark room.
• Power On/Off Settings
• Direct Power On: Allows the projector to turn on automatically once
the power is fed through the power cord.
• Auto Power Off: Allows the projector to turn off automatically if no
input signal is detected after a set period of time to prevent
unnecessary waste of light source life.
Security Settings
• Panel Key Lock
With the control keys on the projector and remote control locked, you can
prevent your projector settings from being changed accidentally (by
children, for example). When the Panel Key Lock is on, no control keys on
the projector and remote control will operate except POWER.
To release panel key lock, press and hold (the right key) on the projector
or remote control for 3 seconds.
If you turn off the projector without disabling panel key lock, the projector will still be in
locked status the next time it is turned on.
• Change Password/Power On Lock
See Utilizing the password function on page 22.