BenQ TK700ST - Page 46

46 Maintenance
Indicators
Indicator
Status & Description
Power events
Stand-by mode
Powering up
Normal operation
Normal power-down cooling
Download
CW start fail
Light source life exhausted
Case open
Burn-In events
Burn-in ON
Burn-in OFF
Light source events
Light source error in normal operation
Light source is not lit up
Thermal events
Fan 1 error (the actual fan speed is outside the desired
speed)
Fan 2 error (the actual fan speed is outside the desired
speed)
Fan 3 error (the actual fan speed is outside the desired
speed)
Temperature 1 error (over limited temperature)
Thermal IC #1 I2C connection error
: Off
: Orange On : Green On : Red On
: Orange Flashing : Green Flashing : Red Flashing