BenQ TK710 - Page 11

11 Introduction
8. SOURCE
Displays the source selection bar.
9. ECO BLANK
Used to hide the screen picture.
Do not block the projection lens from
projecting as this could cause the blocking
object to become heated and deformed or
even cause a fire.
10. MODE/PIC MODE
Displays the picture mode menu.
11.
Displays the keystone menu. See
Correcting keystone on page 17 for details.
12.
Toggles projector audio between on and
off.
13. SOUND MODE
Displays the sound mode menu.
14.
Displays the Game Settings menu.
15.
Activates Auto Focus.
*Available on compatible projectors only.
16. /
Decreases or increase the projector
volume.
Remote control effective
range
The remote control must be held at an angle
within 30 degrees perpendicular to the
projector's IR remote control sensor(s) to
function correctly. The distance between the
remote control and the sensor(s) should not
exceed 8 meters (~ 26 feet).
Make sure that there are no obstacles
between the remote control and the IR
sensor(s) on the projector that might obstruct
the infra-red beam.
• Operating the projector from the front
• Operating the projector from the top
A
p
p
r
o
x
.
+
3
0
º
A
p
p
r
o
x
.
+
3
0
º