20 Operation
Operation
Starting up the projector
1. Plug the power cord. Turn on the power outlet switch
(where fitted). The power indicator on the projector
lights orange after power has been applied.
2. Press on the projector or on the remote
control to start the projector. The power indicator
flashes green and stays green when the projector is
on.
The start up procedure takes about 10 seconds. In
the later stage of start up, a startup logo is projected.
(If necessary) Rotate the focus ring to adjust the
image clearness.
3. If this is the first time you turn on the projector, the setup wizard appears to guide you
through setting up the projector. If you have already done this, skip this step and move on
to the next step.
• Use the arrow keys ( ///) on the projector or remote control to move through the
menu items.
• Use OK to confirm the selected menu item.
Step 1:
Specify Projector Position.
For more information about projector position,
see Choosing a location on page 12.
Step 2:
Specify OSD Language.
To Next Page
Loading...
