BenQ TK710 - Specifications; Projector Specifications

46 Specifications
Specifications
Projector specifications
All specifications are subject to change without notice.
Optical
Resolution
3840 x 2160
Display system
1-CHIP DMD
Throw ratio
1.15 ~ 1.5
Light source
Laser & LED
Electrical
Power supply
AC100–240V, 3.6 A, 50–60 Hz (Automatic)
Power consumption
275 W (Max); < 0.5 W (Standby)
Mechanical
Weight
3.0 Kg +
100 g (6.61 lbs + 0.22 lbs)
Input terminals
Digital
HDMI 1/HDMI 2 (2.0b, HDCP 2.2) x 2
Output terminals
Speaker
5 watt x1
Audio signal output
PC audio jack x 1
Control
USB
USB-A 2.0 x 1 (Power supply 5V /1.5 A, Firmware
upgrade)
RS-232 serial control
9 pin x 1
IR receiver x 2
Environmental Requirements
Operating temperature
0°C–40°C at sea level
Operating relative humidity
10%–90% RH (without condensation)
Operating altitude
0–1500 m at 0°C–35°C
1501–3000 m at 0°C–30°C (with
High Altitude Mode on)
Storage temperature
-20°C–60°C at sea level
Storage humidity
10%–90% RH (without condensation)
Storage altitude
30°C@ 0~12,200m above sea level
Transporting
Original packing or equivalent is recommended.
Repairing
Please visit below website and choose your country to
find your service contact window.
http://www.benq.com/welcome