BenQ TK710 - Controls and Functions

10 Introduction
Controls and functions
Projector & Remote control
1. POWER
Toggles the projector between standby
mode and on.
ON/ Off
Toggles the projector between standby
mode and on.
2. POWER indicator light/TEMPerature
warning light/LIGHT indicator light
(See Indicators on page 44.)
3. IR remote sensor
4. BACK
Goes back to previous OSD menu, exits
and saves menu settings.
5. MENU
Turns on/off the On-Screen Display (OSD)
menu.
6. Arrow keys ( , , , )
When the On-Screen Display (OSD) menu
is activated, these keys are used as
directional arrows to select the desired
menu items and to make adjustments.
When OSD menu is inactive, workable
under CEC-capable sources only.
Keystone keys ( , )
Displays the keystone correction page.
Volume keys /
Decreases or increase the projector
volume.
7. OK
Confirms the selected On-Screen Display
(OSD) menu item.
7
1
4
5
3
2
8
6
9
10
All the key presses described in this
document are available on the remote control
or projector.
1
14
15
5
8
16
9
10
11
6
7
4
12
13