BenQ TK710 - Page 55

55 Specifications
Color Calibration
(only for service)
Write Gain - <CR>*gain=-#<CR>
Write Set Gain value <CR>*gain=value#<CR>
Read Get Gain value <CR>*gain=?#<CR>
Write White Red Gain + <CR>*WRGain=+#<CR>
Write White Red Gain - <CR>*WRGain=-#<CR>
Write Set White Red Gain value <CR>*WRGain=value#<CR>
Read Get White Red Gain value <CR>*WRGain=?#<CR>
Write White Green Gain + <CR>*WGGain=+#<CR>
Write White Green Gain - <CR>*WGGain=-#<CR>
Write Set White Green Gain value <CR>*WGGain=value#<CR>
Read Get White Green Gain value <CR>*WGGain=?#<CR>
Write White Blue Gain + <CR>*WBGain=+#<CR>
Write White Blue Gain -<CR>*WBGain=-#<CR>
Write Set White Blue Gain value <CR>*WBGain=value#<CR>
Read Get White Blue Gain value <CR>*WBGain=?#<CR>
Service
(Only for service)
Write Service mode enable for error report <CR>*error=enable#<CR>
Read Error code report <CR>*error=report#<CR>
Read FAN 1 speed <CR>*fan1=?#<CR>
Read FAN 2 speed <CR>*fan2=?#<CR>
Read FAN 3 speed <CR>*fan3=?#<CR>
Read Temperature 1 <CR>*tmp1=?#<CR>