17
11
Mute
Mutes the built-in speaker
12
USER 1/USER 2/USER 3
Select the User Memory setting
Note: User 3 not support this model
13
Bright Displays the BRIGHTNESS setting bar
14
Color Displays the COLOR setting bar
15
Info Starts the INFORMATION function
16
Light
Turns on or off the remote control backlight for about 10 seconds.
Press any other key while the backlight is on keeps backlight on for a
future 10 seconds
17
Power Off Turns off the projector
18
S-VIDEO Displays the S-VIDEO source selection
19
PC Displays the PC source selection
20
HDMI 2
Displays the HDMI 2 source selection
21
Right cursor/Increase volume
level
Navitages and changes setting in the OSD /Increase volume
22
Down cursor/KEYSTONE key
Navigates and changes setting in the OSD / Manually corrects
distorted images resulting from an angled projection
23
Aspect Select the display aspect ratios
24
Freeze
Freeze and unfreeze the on-screen picture
25
Auto
Automatically determines the best picture timings for the display
image
26
Contrast
Displays the CONTRAST setting bar
27
Sharp
Displays the SHARPNESS setting bar
28
Blank
Hides the screen picture
29
Tint
Displays the TINT setting bar
30
Test
Displays the TEST pattern
Important:
1. Avoid using the projector with bright fluorescent lighting turned on.
Certain high-frequency fluorescent lights can disrupt remote control operation.
2. Be sure nothing obstructs the path between the remote control and the projector.
If the path between the remote control and the projector is obstructed,
you can bounce the signal off certain reflective surfaces such as projector screens.
3. The buttons and keys on the projector have the same functions as the corresponding
buttons on the remote control.
This user’s manual describes the functions based on the remote control.
To Next Page
Loading...
