86
Note List.
*1 換材料時其表面温度高,必須注意充份散熱
The surface temperature Degree is so high while changing materials must pay attention
to filling dispelling the heat before disassembly.
*2 拆組裝後材料易破損,注意是否要換新
Material exchange easily damage after disassembly. It’s concerned that changed to a
new one.
*3 拆組裝後材料後,必須導入新材料
After these material make disassembly and assembly, need be changed into the new
one material.
*4 注意換下之鏍絲尺寸大小
Pay attention to dimension size of screws.
*5 Housing connector 插拔時小心
Housing connectors are carefully while inserted in and pulling out.
*6 拆組裝後必須執行 firmware download procession
Take action for firmware download procession after material disassembly and assembly.
*7 拆組裝後必須執行 calibration adjustment
Take action for calibration adjustment after material disassembly and assembly.
*8 拆組裝後必須執行 color wheel adjustment
Take action for color wheel adjustment after material disassembly and assembly.
To Next Page
Loading...
