Bently Nevada 3500 Galvanic Isolator Interface - Page 14

3500 Galvanic Isolator Interface Manual
10
1
2
3
3
3
3
4
4
To attach the earth rail:
1. Locate the earth rail over the "C" holes of the backplane.
1) Vibration Backplane
2) Keyphasor Backplane
3) “C” Holes
4) Earth Rail Post Positions
2. Mount the earth rails to the backplane
with four M3x12 screws and washers.
1) Earth Terminal
2) Plastic Rivet
3) Earth Rail
4) Earth Rail Post
5) M3 x 12mm Screw and
Washer (2 places per post)
6) Backplane
7) “C” Holes