iii
Additional Information
Notice:
This manual does not contain all the information required to operate and maintain the
3500 Galvanic Isolator Interface. Refer to the Following manuals for other required
information.
3500 Monitoring System Rack Installation and Maintenance Manual (129766-01)
• general description of a standard system
• general description of a Triple Modular redundant (TMR) system
• instructions for installing the removing the module from a 3500 rack
• drawings for all cables used in the 3500 Monitoring System
3500 Monitoring System Rack Configuration and Utilities Guide (129777-01)
• guidelines for using the 3500 Rack Configuration software for setting the operating
parameters of the module
• Guidelines for using the 3500 test utilities to verify that the input and output terminals on
the module are operating properly
3500 Monitoring system Computer Hardware and Software Manual (128158-01)
• instructions for connecting the rack to 3500 host computer
• procedures for verifying communication
• procedures for installing software
• guidelines for using Data Acquisition / DDE Server and Operator Display Software
• procedures and diagrams for setting up network and remote communications
3500 Field Wiring Diagram Package (130432-01)
• diagrams that show how to hook up a particular transducer
• lists of recommended wiring
To Next Page
Loading...
