ATIS TOP - Fancier
INSTALLATION
18
HB_TOP_ZUECHTER-E_22.doc
Gantner Pigeon Systems GmbH
4.3 Blend
Installing the blend take care that the foot of the blend is in the middle of the antenna and
tilted backwards. For special flying off modes it might be useful to fix additional catch-forks
(bob wires) to the blend.
4.4 Rollers
The rollers on the loft antenna are responsible for secure registration of the pigeons and
should therefore be always fixed. Please make sure that they can be revolved easily. We
recommend to carry out such checks of the antennae several times during the flight
season.The horizontal gaps on the rollers are due to production techniques and have no
effect on their function.
4.5 T-Adaptor
The ATIS-TOP has only one connection. Insert the plug of the T-adaptor cable into this 4-
pin outlet. The T-adaptor is equipped with 2 outlets for direct connection to 2 loft antenna
cables and with a separate low voltage connector for a DC transformer.
The yellow LED flashes when there`s communication between the ATIS TOP and the loft
antennae.
To Next Page
Loading...
Need help?
General
