ATIS TOP - Fancier
SUB-MENU CONFIGURATION
86
HB_TOP_ZUECHTER-E_22.doc
Gantner Pigeon Systems GmbH
When calling the function
Master
/
Slave
in the sub-menu
configuration
you get the
following display:
With the 2 cursor keys you can select
MASTER
or
SLAVE
.
Using the function key
choose
the currently active configuration (Master or Slave) is
selected:
After a short beep the TOP restarts with the new selected configuration.
When you have selected the SLAVE configuration you will see this on the display.
Note
: By setting the same pigeon for a race in both TOPs (Master and Slave) on same
time, the secret code will not be correct.
A slave can not be used without a Master, when you plug out the Master you have to
change the configuration of the Slave to a Master.
Master / Slave
MASTER
SLAVE
uit choose
GANTNER ELECTRONIC
NO RACE
01.04.20 15.11.36
SLAVE
To Next Page
Loading...
