Need help?Do you have a question about the Beretta HYDRONIC UNIT and is the answer not in the manual?
General| Brand | Beretta |
|---|---|
| Model | HYDRONIC UNIT |
| Category | Control Panel |
| Language | English |
Guidelines for proper installation, manual handling, and general safety advice for the product.
Prohibits use by children and advises on safe handling, electrical safety, and avoiding water contact.
Covers safe practices for maintenance, touching moving parts, and disposing of packaging material.
Details keys for selecting zones, heating/cooling modes, and adjusting temperature settings.
Explains keys for setting time, programming periods, and managing daily schedules.
Covers keys for locking settings, night mode, and away mode for user convenience.
Explains icons for system status like 'System off', 'Heating Mode', 'Cooling Mode', and 'Alarm'.
Details indicators for time, day of week, humidity, keypad lock, and program enabled status.
Covers indicators for temperature units (°C/°F), anti-freeze, auxiliary heat, and domestic hot water.
Step-by-step guide to configure the current time, date, and operating season (Summer/Winter).
Instructions for locking and unlocking the control panel keys to prevent unauthorized use.
How to temporarily change the set temperature, overriding programmed settings until the next period.
Guidance on setting the thermostat to 'Off' mode for periods of absence and ensuring anti-freeze protection.
Introduction to the simplified programming option for home, away, and night comfort levels.
How to select a comfort level (Home, Away, Night) temporarily and return to the programmed schedule.
Instructions on how to lock specific comfort settings (Home, Away, Night) to prevent program changes.
Explains the link between Touch 'N' Go keys and programming options, including default time bands.
Lists default temperature settings for Hot and Cold modes for Home, Away, and Night periods.
Guide to changing temperature values for Home, Away, and Night modes and selecting operating modes.
Procedure to switch from user-defined parameters to default factory settings using specific key combinations.
Explains the concept of programmed time intervals (Periods P1-P6) and their identification on the display.
Lists the six default time periods and their start times for programming the thermostat's schedule.
Detailed steps to change the start and end times for the six programmed periods (P1-P6) and select day options.
Illustrates how factory-set default periods are allocated to Touch 'N' Go options like Home, Away, and Sleep.
Provides a table to note personal period start times and allocate customized Touch 'N' Go options for each period.
Step-by-step process to link personalized time periods with Home, Away, or Night comfort settings and set ON/OFF mode.
Explains how to use the ZONE key to switch the appliance between ON and OFF modes for specific periods.
Warning about potential unit malfunction or breakage if the heat pump is turned off during periods with harsh outside temperatures.
How to scroll through programmed periods and Touch 'N' Go options to confirm successful changes.
Details error codes for air temperature and humidity sensor failures, indicated by '--'.
Explains EEPROM fault (E4) and communication fault (E3), including their impact and troubleshooting steps.
Describes how fault alarms are indicated and advises on checking water pressure and shut-off valves.
To Next Page
