What to do if Berger Lahr DC Drives have a short-circuit?
If your Berger Lahr DC Drives unit experiences a short-circuit, immediately switch off the equipment and identify and eliminate the short-circuit in the plug, cable, motor, or power stage.
Why is my Berger Lahr WS5-5 power unit overheating?
If your Berger Lahr DC Drives power unit is overheating, improve the ventilation around the power unit and reduce the motor current to address the issue of poor ventilation or excessively high motor current.
What to do if Berger Lahr WS5-5 has a phase interruption?
If your Berger Lahr DC Drives system experiences a phase interruption, switch off the equipment. Inspect the motor cable for any breaks or faults and repair or replace it. If the cable is not the problem, the motor might be faulty and needs replacement.
How to fix undervoltage on Berger Lahr WS5-5?
If your Berger Lahr DC Drives unit is showing undervoltage, it might be due to the mains voltage being too low or the voltage switch being incorrectly set for the operating voltage (e.g., set to 230V AC while operating on 115V AC). To resolve this, switch off the equipment and set the correct voltage on the voltage switch.
How to resolve reset issue on Berger Lahr WS5-5?
If the Berger Lahr DC Drives system is in a reset state, ensure that the ENABLE input is active. Activate the ENABLE input to take the system out of reset.
General| Brand | Berger Lahr |
|---|---|
| Model | WS5-5 Series |
| Category | DC Drives |
| Language | English |
Details the physical components and design features of the WS5-5 power drive.
Explains how the WS5-5 drive connects and operates within a larger system.
Outlines the operational blocks and signal flow within the WS5-5 power drive.
Provides detailed specifications for electrical, mechanical, and environmental parameters.
Lists components included with the WS5-5 drive and their order numbers.
Details optional accessories available for the WS5-5 drive.
Covers the physical installation and mounting requirements for the WS5-5 unit.
Explains the procedures for connecting electrical cables to the WS5-5 drive.
Guides through the initial setup and basic configuration steps before first use.
Explains the meanings and functions of various input and output signals.
Details the procedure for powering up the WS5-5 drive correctly.
Describes how the WS5-5 is controlled and operated via external signals.
Outlines the procedure for safely powering down the WS5-5 drive.
Explains the LED indicators used to signal the operational status and faults.
Provides a guide to diagnose and resolve common faults and errors.
Gives guidelines for safely storing and transporting the WS5-5 equipment.
Details the various accessories available for the WS5-5 drive and their references.
Defines key technical terms and concepts used in the WS5-5 manual.
To Next Page