1 – Lowest delay setting
..
20 (factory default)
..
30 – Highest delay setting
SETUP BR - VEL BOOST
This setting helps boosting velocity values. Useful for compensating short
velocity sample delay settings and for situations where you want to reach high
velocity levels faster in relation to breath level.
OFF – Velocity bias disabled (factory default) 1 – Lowest setting
..
9 – Highest setting
SETUP BR - BR INTERV
Interval between breath messages sent. If your synth is not keeping up with
the MIDI stream from your controller, try increasing the interval. Values below
6ms are not recommended for wireless use, and this is set as default value.
Settings go from 3ms to 15ms.
To Next Page
Loading...
Need help?
General