SETUP CTR
Menu for settings related to controllers in general.
SETUP CTR - BITE CTL
Sets control destination for bite sensor.
OFF – No destination active for this controller
VIB – Vibrato
GLD – Glide/portamento (defined by GLIDE MOD and GLIDE LMT settings)
CC – Custom CC output (defined in BITE CC settings)
SETUP CTR - BITE CC
CC number for bite (sent if CC is selected in BITE CTL).
0 to 127
SETUP CTR - LEVER CTL
Sets control destination for thumb lever.
OFF – No destination active for this controller
VIB – Vibrato
GLD – Glide/portamento (defined by GLIDE MOD and GLIDE LMT settings)
CC – Custom CC output (defined in BITE CC settings)
To Next Page
Loading...