EWX – Extended EWI fingering. Releasing LH1 or touching RHp3 does octave
shift where applicable, increasing range above and below the octave breaks.
SAX – Saxophone fingering. Keys below relevant specified fingerings do not
have effect on note selection. (Only LHp2 and RHs are always active for -1 and
+1)
EVI – Electronic Valve Instrument fingering adapted for EWI. EVR – EVI fingering
with reversed octave rollers.
On the NuEVI, the fingering menu offers the possibility of reversed roller
action or a couple of experimental harmonic series based settings.
EVI – EVI fingering
EVR – EVI fingering with reversed roller action
TPT – Trumpet (experimental) Rollers controlling harmonics, K4 switching
between harmonic series version
HRN – Double horn (experimental). Rollers controlling harmonics, K4 switching
between horns
SETUP CTR – ROLLRMODE
Sets the way the controller handles octave rollers. Mode 1 = Highest
touched roller, no release memory (legacy style); Mode 2 = Highest touched
roller, release memory (default); Mode 3 = Touched roller pair, release memory.
Mode 4 = Touched roller pair, release memory, bonus octave on top.
SETUP CTR - PITCH BEND
The pitch bend signal can be divided to work with synthesizers that are not
able to set the pitch bend range low enough to fit this kind of instrument. As an
To Next Page
Loading...
Need help?
General