When setting LVL/LVP, the breath and glide LEDs crossfade between them
to indicate setting. All breath LED is 127 (max) and all glide LED is 0 (min).
PBD is factory default pinky key setting, as it is the legacy function of this
key.
SETUP CTR – LEVEL CC
CC to be sent using pinky key level controls LVL and LVP. 1 to 127, default OFF.
SETUP CTR – EXTRA PKEY (NuRAD only)
Settings for the customizable extra LH pinky key, the LHp3.
OFF – LHp3 disabled
-12 – 12 semitones (1 octave) down
..
-1 – One semitone down
MOD – Use LHp3 as a secondary mod key (see MOD KEY above)
+1 – One semitone up
..
+12 – 12 semitones (1 octave) up
SETUP CTR – FINGERING
Selects fingering mode. (See separate charts for details on NuRAD fingerings.)
EWI – Standard EWI fingering. Flexible, as it allows all keys to affect pitch at all
times.