bergmann 3012 PLUS - Steps for Starting Dumper

Start-up
Operating manual, Dumper – 3012 PLUS
103 - 131
28 April 2015
Bergmann Maschinenbau GmbH & Co. KG
DANGER
10.2. Steps for starting dumper
 Switch all operating levers to zero position.
 Apply the handbrake by pressing the handbrake button (parking position).
 Set the travel direction switch on the joystick to zero position.
RISK OF INJURY!
Before starting the machine, check that there are no people
within the dumper's danger area.
Before starting the engine, sound the horn.
Never turn the ignition key when the engine is running!
 Start the dumper only if all safety devices and features are in place and working properly.
 In the event of a fault or malfunction, immediately shut down the dumper and secure it. Eliminate
the cause of the fault or malfunction without delay.
CAUTION