bergmann 3012 PLUS - Preparing the dumper for travel operation

Start-up
106 - 131
Operating manual, Dumper – 3012 PLUS
Status 28 April 2015
Bergmann Maschinenbau GmbH & Co. KG
Fig. 10-1
10.6. Travel operation
10.6.1. Preparing the dumper for travel operation
Put the trough into transport position (i.e. lower the trough to the stop in centre position). Ensure that the
securing bracket (in front frame) preventing the through from swivelling to the side is properly engaged in
the grooved plate of the trough (securing bracket at through, fig 10-1).
Hinweis: Fotos vom Rundkipper standen nicht zur
Verfügung.