Safety
30 - 131
Operating manual, Dumper – 3012 PLUS
Status 28 April 2015
Bergmann Maschinenbau GmbH & Co. KG
5.25. Working in contaminated areas
For work in contaminated areas, strictly observe the relevant special instructions.
Example: Technical Rules for Hazardous Materials TRGS 524
5.26. Safety devices / organisational safety measures
Before starting the dumper, ensure that all safety devices and guards are correctly attached and in proper
working order. Safety devices and guards may only be removed:
after the machine has been halted;
after it has been secured against inadvertent restarting.
When replacing parts, ensure that the safety devices are reattached properly by the operator. The
machine owner must provide the necessary personal protection equipment for workers. Regularly check
all installed safety devices and guards.
5.27. Informal safety measures
A copy of the operating manual must be kept in the dumper where it is easily accessible to all persons
working on or with the machine. In addition to the operating manual, always comply with the general
safety standards and the statutory regulations on occupational safety, accident prevention and
environmental protection. All safety and danger signs and symbols attached to the dumper must be
legible at all times. Replace illegible signs and symbols.
To Next Page
Loading...