FEATURES & NAVIGATION
BACK ARROW
Use this arrow usually located on the upper left of the screen to navigate back to the previous
screen. If it does not appear, then there is no previous screen.
DATA LOGGING
Touch this icon to begin logging data. The icon ashes to indicate measurements currently being
seen on screen are also being recorded to the unit’s internal ash storage. All data logs are time
stamped using the Yorkie-Pro’s internal GPS for precise time and positioning. Simply touch the
icon again to stop data logging.
Internal storage allows for 5 unique data logging sessions at approximately 13MB per log le.
Depending upon the screen being logged, the resulting data can be logged for a range of time.
This data can then be downloaded from Yorkie-Pro to a PC for futher analysis in any standard
spreadsheet application. Check with your BVS sales or support representative for more informa-
tion.
MAIN MENU
Touch this menu icon to enter the MAIN MENU settings from any screen. If you do not see this
icon at the top of the screen, you are already in the MAIN MENU. Continue further into this user
manual for a detailed breakdown of all settings.
DATA SNAPSHOT
Touch this camera icon to take a quick data snapshot of the on-screen data at anytime. Note:
this does not take a screen image but rather it captures all visible measurements into a data
snapshot. Yorkie-Pro can store up to 256 snapshots internally.
This allows for convenient data points that can easily be integrated into a spreadsheet or report.
All snapshots are time stamped using the Yorkie-Pro’s internal GPS for precise time and position-
ing. These snapshots can then be downloaded from Yorkie-Pro to a PC for futher analysis in any
standard spreadsheet application.
BATTERY STATUS
This battery icon indicates the unit’s remaining power at a glance. For estimated runtime and
battery details, choose BATTERY STATUS in the MAIN MENU.
Page 5
To Next Page
Loading...