Bernina Electronic 1008 - Page 52

MASTERING YOUR BERNINA
®
1/10/02
Electronic 1008/52
BERNINA
®
Electronic 1008
MASTERING
YOUR
BERNINA
®
ELASTIC THREAD IN THE BOBBIN
• A Black Latch bobbin case is suggested.
• Wind elastic thread on the bobbin.
• Place in bobbincase and adjust tension if necessary.
• Select Straight Stitch #1/green - SL 4mm-5mm, center needle position, top tension 7-9.
• Draw guidelines on the fabric, spacing them evenly apart.
• Sew from the right side of the fabric.
• Keep rows flat as sewing.
• When finished, steam press the sample, holding the iron over the fabric with the elastic
side up. Do not touch the iron to the fabric.
• Leave the fabric flat until dry.
• Trim all four edges of the sample fabric before beginning.
Fabric: Rayon Challis - 12” x 4”
Needle: 80/12 Universal
Thread: All-purpose sewing
Elastic thread (bobbin)
Presser Foot: Reverse Pattern Foot #1
Other: Black Latch Bobbin Case (optional)